Alfa PC Dripper APPLICATIONS: Especially recommended when precise capacity is required, on the unlevel ground and where self-compensating drippers are necessary. RAW MATERIALS: Insert and cap made of anti-UV stabilized polypropylene. Membrane made of silicone material. SPECIFICATIONS: -Self-compensation ranges from 1.0 to 3.5 bar(from 10 to 35 m.c.a.) Maximum variation with respect to nominal capacity:

Butterfly Micro Sprinkler Specification: Connect size: 1/2&3/4 inch male thread 1/2&3/4 inch female thread Work Pressure: 1.0-3.0kg Spray radius: approx. 4-5m Flow Rate: 400-600 L/H Spray direction: 360 degrees Applicable scope: Widely used for irrigating lawn, nursery, backyard, flowers, trees, orchard, garden, greenhouse, etc. Make water atomization, the formation of water mist, then the temperature

High density polyethylene (HDPE) has excellent chemical stability, aging resistance and environmental stress cracking resistance. The HDPE Double wall corrugated pipe produced from it is a flexible pipe. Its performance is as follows: Strong resistance to external pressure The outer wall has an annular corrugated structure, which greatly enhances the ring stiffness of the pipe,

Double Wall bellows is a new type of lightweight pipe made of high-density polyethylene. It has the characteristics of light weight, high pressure resistance, good toughness, fast construction and long service life. Its intentional wall structure design and other structures Compared with pipes, the cost is greatly reduced. And because the connection is convenient and reliable,

Ball valves include: floating ball valve, fixed ball valve, track ball valve, V-shaped ball valve, three-way ball valve, stainless steel ball valve, cast steel ball valve, forged steel ball valve, ash unloading ball valve, sulfur resistant ball valve, pneumatic ball valve, electric ball valve, ferrule ball valve and welded ball valve. According to the classification

1. Bypass valve: the ball valve is generally opened by static water, so the bypass valve is set for flat pressure first, that is, both sides are filled with water; 2. Air valve: when filling water, remove the air and take the float to close the valve by itself; During drainage, make up air and

Compared with other types of valves, pneumatic ball valve has the advantages of angular stroke output torque, rapid, stable and reliable opening, wide application, and the following advantages: 1. The thrust bearing reduces the friction torque of the valve stem, which can make the long-term operation of the valve stem stable and flexible. 2. Anti

Ball valve is a valve whose opening and closing parts (ball) are driven by the valve stem and rotate around the axis of the ball valve. It can also be used for fluid regulation and control. Among them, there is a strong shear force between the V-shaped ball core of hard sealed V-shaped ball valve